Eurotherm Chessell Recorder 5100V and 5180V Specifications

5100V

Technical Specifications

TECHNICAL SPECIFICATION (Recorder)

Board types and hardware options

Six-channel universal input

Model 5180V:

Eight boards (48 channels) max.

Model 5100V:

Three boards (18 channels) max.

Three Change-over relay output board

Model 5180V:

Nine boards (27 outputs) max.

Model 5100V:

Four boards (12 outputs) max.

3.5 inch floppy disk, or PC Card (ATA flash or hard disk).

Environmental Performance

Temperature limits

PC Card Option:

Operation: 0 to 50°C; Storage: -25 to 70°C

Floopy disk drive option:

Operation: 5 to 40°C; Storage: -20 to 50°C

Humidity limits

Pc Card option:

Operation: 8% to 85% RH; Storage: 8% to 90% (both non-condensing)

Floopy disk drive option:

Operation 20% to 80% RH; Storage: 8% to 80% (both non-condensing)

Protection

Bezel and display

IP65

Shock

BS EN61010

Vibration (10 to 150 Hz)

2g peak

Altitude

<2000 metres.

Electromagnetic compatibility (EMC)

Emissions

BS EN50081-2

Immunity

BS EN50082-2

Electrical saftey

(BS EN61010)

Installation cat. II; Pollution degree 2

Physical (Model 5100V)

Panel mounting

DIN43700

Bezel size

144 x 144 mm.

Panel cutout dimensions

138 x 138 (both - 0 + 1 mm)

Depth behind bezel rear face

248 mm

Weight

3 kg

Panel mounting angle

Recorders with hard disk:

Vertical panel only

Recorders with floppy disk:

+15°

Other 5100V recorders:

+45°

Physical (Model 5180V)

Panel mounting

DIN43700

Bezel size

144 x 288 mm

Panel cutout dimensions

281 x 281 (both - 0 + 1 mm)

Depth behind bezel rear face

305 mm

Weight

7.5 kg

Panel mounting angle

Recorders with hard disk :

Vertical panel only

Recorders with floppy disk:

+15°

Other 5180V recorders:

+45°

Operator interface

Type

Colour TFT LCD witih cold cathode backlighting.

Fitted with resistive, analogue, toughened touch-panel

Size and resolution

Model 5100V:

1/4 VGA (320 x 240 pixels)

Model 5180V:

SVGA (800 x 600 pixels)

Power requirements

Line voltage

47 to 63 Hz

85 to 265V

Power (Max)

60VA (Inrush current 36A)

Fuse type

None

Ethernet communications

Electrical standard

10Mbs Ethernet. 10BaseT.

Transport protocol

TCP/IP. Provision for File Transfer Protocol (FTP)

Technical Specification (Input board)
General

Input types

dc Volts, dc millivolts,

dc milliamps (with shunt),

Thermocouple,

2/3 - wire RTD

Contact closure (not chan. 1) >60ms

Input type mix

Freely configurable.

Maximum number of inputs

6 per board

Termination

Edge connector / terminal block

Noise rejection (48 to 62 Hz)

Common mode: >140dB (channel to channel and channel to ground

Series mode: >60dB.

Maximum common mode voltage

250 Volts continuous

Maximum series mode voltage

45 mV at lowest range;

12 Volts peak at highest range.

Insolation (dc to 65 Hz; BS EN61010)

Installation cat II; Polution degree 2

Channel to channel:

300V RMS or dc (double insulation)

Channel to common electronics:

300V RMS or dc (double insulation)

Channel to ground:

300V RMS or dc (basic insulation)

Dielectric strength (BS EN61010)

(1 minute type tests)

Channel to channel

2300 Vac

Channel to ground

1350 Vac

Insulation resistance

>10MW at 500 V dc

Input impedance

38mV, 150 mV, 1 V rnages: >10MW;

10V range: 68.8 kW

Over voltage protection

50 Volts peak (150V with attenuator)

Open cirucit detection

+57 nA max.

Recognition time

500 msec

Minimum break resistance

10 MW

Update/archive rates

Input/Relay-output sample rate

8 Hz

Display update

1 Hz

Archive sample-value

Latest value at archive time

Trend/Display value

Latest value at display update time

DC Input ranges

Shunt

Externally mounted resistor modules

Additional error due to shunt

0.1% of input

Additional error due to attenuator

0.2% of input

Performance

See table 1

Low Range	High Range	Resolution	Maximum Error (Instrument at 20°C)	Worst case temperature performance
-8 mV	38mV	1.4mV	0.085% input + 0.073% range	80ppm of input der deg C
-30mV	150mV	5.5mV	0.084% input + 0.053% range	80ppm of input per deg C
-0.2 Volt	1 Volt	37mV	0.084% input + 0.037% range	80ppm of input per deg C
-2 Volts	10 Volts	370mV	0.275% input + 0.040% range	272ppm of input per deg C

Table 1 DC performance

Thermocouple data

Temperature scale

ITS 90

Bias current

0.05 nA

Cold junction types

Off, internal, external

CJ error

1°C max with inst. at 25°C

CJ rejection ratio

50:1 minimum

Remote CJ

Via any user-defined channel

Upscale / downscale drive

High, low or none selectable for each

thermocouple channell

Additional error:

0.01 °C(type.) if high or low selected

Types and ranges

See table 2

T/C Type	Overall range (°C)	Standard	Maximum linearisation error
B	0 to + 1820	IEC584.1	0 to 400°C: 1.7°C 400 to 1820°C: 0.03°C
C	0 to + 2300	Hoskins	0.12°C
D	0 to 2495	Hoskins	0.08°C
E	0 to 2495	IEC584.1	0.03°C
G2	0 to 2315	Hoskins	0.07°C
J	-210 to + 1200	IEC584.1	0.02°C
K	-270 to + 1372	IEC584.1	0.04°C
L	-200 to + 900	DIN43700:1985 (To IPTS68)	0.20°C
N	-270 to + 1372	IEC584.1	0.04°C
R	-50 to + 1768	IEC584.1	0.04°C
S	-50 to + 1768	IEC584.1	0.04°C
T	-270 to + 400	IEC584.1	0.02°C
U	-200 to + 600	DIN43710:1985	0.04°C
NiMoNiCo	-50 to + 1410	ASTM E1751-95	0.06°C
Platinel	0 to + 1370	Engelhard	0.02°C

Table 2 Thermocouple types and ranges

Resistance inputs

Ranges (including lead resistance)

0to 150W, 0 to 600W, 0 to 6kW

Influence of lead resistance

Error=negligible;

Mismatch=1W/W

Temperature Scale

ITS90

Accuracy and resolution

See table 3

Low Range	High Range	Resolution	Maximum error (Instrument at 20°C)	Worst case temperature performance
0W	150W	5mW	0.045% input + 0.110% range	35ppm of input per deg C
0W	600W	22mW	0.045% input + 0.065% range	35ppm of input per deg C
0W	6kW	148mW	0.049% input + 0.035% range	35ppm of input per deg C

Table 3 Resistance ranges - accuracy and resolution

RTD Type	Overall range (°C)	Standard	Max linearisation error
Cu10	-20 to + 400	General Electric Co.	0.02°C
JPT100	-220 to + 630	JIS C1604:1989	0.01°C
Ni100	-60 to + 250	DIN43760:1987	0.01°C
Ni120	-50 to + 170	DIN43760:1987	0.01°C
Pt100	-200 to + 850	IEC 751	0.01°C
Pt100A	-200 to + 600	Eurotherm Recorders SA	0.09°C
Pt1000	-200 to + 850	IEC 751	0.01°C

Table 4 RTD types and ranges

Relay outputs

Maximum switching power*

500VA or 60W

Maximum breaking current*

2 Amps within above power ratings

Maximum contact voltage*

250V within above power ratings

Isolation

Contact to contact:

300V RMS or dc (double insulation)

Contact to ground:

300V RMS or dc (basic insulation)

Estimated life*

30,000,000 operations

Last updated December 21, 2003