Eurotherm Chessell Recorder 5100E Specifications

5100E

Technical Specifications

TECHNICAL SPECIFICATION (Recorder)

Standard features

Inputs

Six universal input channels

Outputs

One form C relay

Archiving

Onto 3.5 inch floppy disk

Communications standard

Ethernet

Environmental Performance

Temperature limits

Operation: 5 to 40°C; Storage: -20 to + 50°C

Humidity limits

Operation/Storage: 20% to 80% RH(non-condensing)

Protection

Bezel and display

IP65

Sleeve:

IP20

Shock

BS EN61010

Vibration (10 to 150 Hz)

2g peak

Altitude

<2000 metres.

Electromagnetic compatibility (EMC)

Emissions and immunity

BS EN61326

Electrical saftey

(BS EN61010)

Installation cat. II; Pollution degree 2

Physical

Panel mounting

DIN43700

Bezel size

5.67" x 5.67" (144mm x 144mm)

Panel cutout dimensions

5.43" x 5.43"[(138x138) - (both – 0 + 1 mm)]

Depth behind bezel rear face

With terminal cover:

9.76" (248mm)

Without terminal cover:

8.39" (213mm)

Weight

1.36 lb (3kg) max

Panel mounting angle

up to +15° from vertical

Operator interface

Type

Color STN LCD with cold cathode backlighting

Fitted with resistive, analog, toughened touch-panel

Size and resolution

1/4VGA (320 x 240 pixels)

Power requirements

Line voltage

47 to 63 Hz

85 to 265V

Power (Max)

60VA (Inrush current 36A)

Fuse type

None

Interrput protection

Holdup >200ms at 240V ac, with full load

Back-up battery

Type

Poly-carbonmonofluoride/lithium (BR2330)

Support time

A fully charged new battery supports the real-time clock for a minimum of 1 year with the recorder unpowered

Replacement period

3 Years

Ethernet communications

Electrical standard

10Mbs Ethernet. 10BaseT.

Transport protocol

TCP/IP. Provision for File Transfer Protocol (FTP)

Technical Specification (Input board)
General

Input types

dc Volts, dc millivolts,

dc milliamps (with shunt),

Thermocouple,

2/3 - wire RTD

Contact closure (not chan. 1) >60ms

Input type mix

Freely configurable.

Maximum number of inputs

Termination

Edge connector / terminal block

Noise rejection (48 to 62 Hz)

Common mode: >140dB (channel to channel and channel to ground

Series mode: >60dB.

Maximum common mode voltage

250 Volts continuous

Maximum series mode voltage

45 mV at lowest range;

12 Volts peak at highest range.

Insolation

Channel to channel:

300V RMS or dc (double insulation)

Channel to common electronics:

300V RMS or dc (double insulation)

Channel to ground:

300V RMS or dc (basic insulation)

Dielectric strength (BS EN61010)

(1 minute type tests)

Channel to channel

2300 Vac

Channel to ground

1350 Vac

Insulation resistance

>10MW at 500 V dc

Input impedance

38mV, 150 mV, 1 V ranges: >10MW;

10V range: 68.8 kW

Over voltage protection

50 Volts peak (150V with attenuator)

Open cirucit detection

+57 nA max.

Recognition time

500 msec

Minimum break resistance

10 MW

Update/archive rates

Input/Relay-output sample rate

8 Hz

Display update

1 Hz

Archive sample-value

Latest value at archive time

Trend/Display value

Latest value at display update time

DC Input ranges

Shunt

Externally mounted resistor modules

Additional error due to shunt

0.1% of input

Additional error due to attenuator

0.2% of input

Performance

See table 1

Low Range	High Range	Resolution	Maximum Error (Instrument at 20°C)	Worst case temperature performance
38 mV	-38 mV	1.4mV	0.085% input + 0.051% range	80ppm of input der deg C
150 mV	-150 mV	5.5mV	0.084% input + 0.038% range	80ppm of input per deg C
1 Volt	-1 Volt	37mV	0.084% input + 0.029% range	80ppm of input per deg C
10 Volts	-10 Volts	370mV	0.275% input + 0.030% range	272ppm of input per deg C

Table 1 DC performance

Thermocouple data

Temperature scale

ITS 90

Bias current

0.05 nA

Cold junction types

Off, internal, external

CJ error

1°C max with inst. at 25°C

CJ rejection ratio

50:1 minimum

Remote CJ

Via any user-defined channel

Upscale / downscale drive

High, low or none selectable for each

thermocouple channell

Types and ranges

See table 2

T/C Type	Overall range (°C)	Standard	Maximum linearisation error
B	0 to + 1820	IEC584.1	0 to 400°C: 1.7°C 400 to 1820°C: 0.03°C
C	0 to + 2300	Hoskins	0.12°C
D	0 to 2495	Hoskins	0.08°C
E	-270 to + 1000	IEC584.1	0.03°C
G2	-0 to 2315	Hoskins	0.07°C
J	-210 to + 1200	IEC584.1	0.02°C
K	-270 to + 1372	IEC584.1	0.04°C
L	-200 to + 900	DIN43700:1985 (To IPTS68)	0.20°C
N	270 to + 1300	IEC584.1	0.04°C
R	-50 to + 1768	IEC584.1	0.04°C
S	-50 to + 1768	IEC584.1	0.04°C
T	-270 to + 400	IEC584.1	0.02°C
U	-200 to + 600	DIN43710:1985	0.08°C
NiMoNiCo	0 to + 1406	Ipsen	0.14°C
Platinel	0 to + 1370	Engelhard	0.02°C

Table 2 Thermocouple types and ranges

Resistance inputs

Ranges (including lead resistance)

0to 150W, 0 to 600W, 0 to 6kW

Influence of lead resistance

Error=negligible;

Mismatch=1W/W

Temperature Scale

ITS90

Accuracy and resolution

See table 3

Low Range	High Range	Resolution	Maximum error (Instrument at 20°C)	Worst case temperature performance
0W	150W	5mW	0.045% input + 0.110% range	35ppm of input per deg C
0W	600W	22mW	0.045% input + 0.065% range	35ppm of input per deg C
0W	6kW	148mW	0.049% input + 0.035% range	35ppm of input per deg C

Table 3 Resistance ranges - accuracy and resolution

RTD Type	Overall range (°C)	Standard	Max linearisation error
Cu10	-20 to + 400	General Electric Co.	0.02°C
JPT100	-220 to + 630	JIS C1604:1989	0.01°C
Ni100	-60 to + 250	DIN43760:1987	0.01°C
Ni120	-50 to + 170	DIN43760:1987	0.01°C
Pt100	-200 to + 850	IEC 751	0.01°C
Pt100A	-200 to + 600	Eurotherm Recorders SA	0.09°C
Pt1000	-200 to + 850	IEC 751	0.01°C

Table 4 RTD types and ranges

Relay outputs

Termination

3-way connector

Maximum switching power*

500VA or 60W

Maximum breaking current*

2 Amps within above power ratings

Maximum contact voltage*

250V within above power ratings

Isolation

Contact to contact:

300V RMS or dc (double insulation)

Contact to ground:

300V RMS or dc (basic insulation)

Estimated life*

30,000,000 operations

Last Updated Friday, May 12, 2006